Top 10 Best-Selling Electronic Components in 2022

 

  In 2021, the demand for passive components will not be slow in the off-season and not busy in the peak season. Under the influence of long-short material, inventory adjustment, and China's power-limiting policy, the demand for consumer electronics in Greater China will be revised the most.

 

  However, passive component factories are not pessimistic about the market demand in 2022. As countries gradually leave or get used to co-existing with COVID-19, the pace of 5G infrastructure deployment will accelerate, and WiFi6/6E will officially take off. Terminals for university computing (HPC) and AIoT Application development, as well as general trends such as automotive electronics and system modularization, will push up the demand for passive components or create new market opportunities.

 

  The following top 10 electronic components are listed on the Techdesign e-commerce platform, summarizing the best-selling products in 2022. In the trading market where the supply chain sets the tone and digital electronic orders are placed, the overall industry will have the potential for a moderate growth of 5-10%. We are optimistic about supply chain problems such as shortage of materials, lack of cabinets, and power shortages, if they are alleviated in advance or will not occur again. As long as the inventory is digested to a healthy level, Taiwanese passive component factories are still optimistic about the restart of demand for consumer electronics.

 

  •      Arlitech AMPI0630ED1R5MT

Compact and low profile with max.3.0mm, the AMPI0630ED1R5MT‘s high performance is realized by metal core, low loss realized with low DCR and high Isat. It is applicable at high frequency up to 750KHz and RoHS compliant.

 

  •      Nuvoton N76E003AT2

N76E003; a 1T-8051 based series MCU, offers 18KB Flash ROM, configurable Data Flash, and 1 KB SRAM. It supports a wide operating voltage of 2.4V to 5.5V, temperature range of -40℃ to 105℃, and high noise immunity of 7kV ESD and 4 kV EFT.

 

  •      Panjit PJT782

With advanced trench process technology, the PJT7828 is ESD protected, specially designed for Relay driver and speed line drive, lead-free in compliance with EU RoHS 2011/65/EU directive, and is a green molding compound as per IEC61249 Std.

 

  •      Winbond W25Q128JVSIQ

128M-bit Serial Flash Memory with uniform 4KB sectors and Dual/Quad SPI.

 

  •      Nuvoton M0516LDN

The M0516LDN operates at 2.5V ~ 5.5V and -40℃ ~ 85℃, and provides 22.1184 MHz high precision internal oscillator ( ±1% accuracy at 25℃, 5V; full range ±3%), rich peripherals and high immunity ( 8kV ESD, 4kV EFT). The package type is LQFP48.

 

  •      Reyax RYLR896

The RYLR896 transceiver module features the Lora long-range modem that provides ultra-long range spread spectrum communication and high interference immunity while minimizing current consumption. The RYLR896 is certified by NCC and FCC.

 

  •      Reyax RYLR406

The RYLR406 transceiver module features the Lora long-range modem that provides ultra-long range spread spectrum communication and high interference immunity while minimizing current consumption.

 

  •      Winbond W29N04GVBIAA

4Gb SLC NAND Flash Memory with uniform 2KB+64B page size.

 

  •      Winbond W29N02GVSIAA

2Gb SLC NAND Flash Memory with uniform 2KB+64B page size.

 

  •      Nuvoton MS51FB9AE

NuMicro® MS51FB9AE is embedded with based on a 1T 8051-based CMOS microcontroller, runs up to 24MHz, features 16K bytes flash, 1K bytes SRAM, and 4K bytes loader ROM for the ISP, and is also equipped with rich peripherals.

 

(Source: Techdesign Blog & Digitimes)

 2023-01-11